2010 Acura TL Oil Type & Capacity
The 2010 Acura TL takes 4.5 quarts (4.3 liters) of 0W-20 oil with a filter change.
Oil viscosity0W-20
Capacity (with filter)4.5 qt
| Engine | Viscosity | Capacity |
|---|---|---|
| 3.5 | 0W-20 | 4.5 qt / 4.3 L |
Capacities are with an oil-filter change. Confirm on the dipstick after refilling.
Verified fitLast checked
Sources: cararac - Acura TL
0W-20 is a low-viscosity full-synthetic oil; using a thicker grade can hurt fuel economy and, on some engines, void the warranty. Capacities shown include the oil filter. Always confirm against your dipstick after refilling.
Oil & filter for the 2010 Acura TL
You need 0W-20 oil (4.5 quarts with a filter change). Buy the oil and a filter together; a DIY oil change takes about 30 minutes, or any shop can do it.
Shop 0W-20 full-synthetic oil on AmazonA 5-quart jug covers an oil changeShop an oil filter for the 2010 Acura TL on AmazonBuy the filter with the oil
As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.
Frequently asked
How much oil does a 2010 Acura TL take?
It takes 4.5 quarts (4.3 liters) with an oil-filter change.
What kind of oil does a 2010 Acura TL use?
0W-20 full-synthetic motor oil.
Can I use a thicker oil instead of 0W-20?
Stick with 0W-20. Modern engines spec a low-viscosity oil for fuel economy and tight clearances; a thicker grade can reduce mpg and may affect your warranty.